There are many Articles around the web that describe how to install OS X on a normal PC. But there is no full guide who describes how to update 10.5.1 to 10.5.4. So here is it.
Upgrade 10.5.1 to 10.5.2
- Download the 10.5.2 Combo Update (search Google) 343MB
- Go to /System/Library/Extensions/
- Start Update
- When AppleIntelCPUPowerManagement.kext apperars, move it to trash immediatly
- The install finishes, but do NOT click the restartbutton!
- Go to /System/InstallAtStartup/scripts/ and open the file 1 with a texteditor
if you can’t access the folder- rightclick > Get Info
- at the bottom of the window it says Sharing & Permission, unlock it and click the plusbutton
- Select your Username, press Select and change your permissions to read & write
- Find the string /System/Library/Extensions/Dont Steal Mac OS X.kext and replace it with /System/Library/Extensions/dsmos.kext
- Save the file and restart
Update 10.5.2 to 10.5.3
- Download the 10.5.3 Combo Update (search Google) 536MB
- Repeat steps 2 to 8 from above
Update 10.5.3 to 10.5.4
Just start the Apple Softwareupdate, download and install the 10.5.4 update.
Now you should have running OS X 10.5.4!
If you’ve any problems write a comment and I’ll help you!
Thanks to netkas.org (Update 10.5.2/10.5.3) and Infintite Mac (Update 10.5.4).
Cocoatree 
91 comments
Comments feed for this article
July 21, 2008 at 11:09 pm
Jordan
Great guide! and thanks for the link! I’m going to link to you in my article.
July 22, 2008 at 7:27 pm
Sam
Hi
(sorry for my english) i had trouble updating from Kalyway 10.5.2 to 10.5.3 i have the eternel grey screen with the apple logo and the spining wheel i tried every methode (way) what could be the probeleme? thank you
Asus: P5k/Wifi
Intel: dual core 6750 2,6ghz
Nvidia: 8800 Gtx (760mo dedicated)
July 22, 2008 at 9:34 pm
p
@Sam: hmmm… normally it starts up, crashes down and restarts again… then it worked
try to hit F8 at startup and type
-x
or try
update -v
July 23, 2008 at 4:27 am
Mike
Hi,
I just started the update and got a kernel panic after moving the ” AppleIntelCPUPowerManagement.kext” to the trash. Now system is grey screen and spinning wheel.
Any thoughts?
July 23, 2008 at 8:50 pm
Sam
“@Sam: hmmm… normally it starts up, crashes down and restarts again… then it worked
try to hit F8 at startup and type
-x
or try
update -v”
thx for repling when i type “update -v” nothing start but with -v or -x or -v -x i’ve got the istall options booting from the start impossible for me to bypass the options and go to my account
July 24, 2008 at 8:25 am
Alan
I ran into a problem during the 10.5.2 -> 10.5.3 combo update.
Not quite sure what was responsible for it, but I was unable change the permissions to modify the ‘/System/InstallAtStartup/scripts/1’ file. Everytime I tried to open a Get Info screen, Finder would crash.
I tried sudo and su in the terminal… but I don’t think I had root access enabled. Probably would’ve been a better idea to enable root access then modify the file in the terminal, but I tried to boot into safe mode to modify the file and I had loads of fun…
What I ended up doing was booting into the install DVD, then opening up Terminal under the Utilities menu and editing the file in there. I used:
“/Volumes/Leopard/usr/bin/vi /Volumes/Leopard/System/InstallAtStartup/scripts/1”
A bit involved… but I’m on 10.5.3 now! Hope this helps someone!
July 26, 2008 at 2:08 am
Top Posts « WordPress.com
[…] How-to Update Kalyway 10.5.1 to 10.5.4 [image] There are many Articles around the web that describe how to install OS X on a normal PC. But there is no […] […]
July 26, 2008 at 10:56 pm
Steve
I followed your steps i had kalway 10.5.1 installed on a dell latitude D620 it loads fine when i updated to 10.5.2 by following your steps it restarted and ten restarted again and was updated I tried to update to the kalyway 10.5.3 comboupdate and follow the same steps but there was no AppleIntelCPUPowerManagement.kext in the /System/Library/Extensions/ and there was no /System/Library/Extensions/Dont Steal Mac OS X.kext on eather time i looked for it but I did notice that it already said /System/Library/Extensions/dsmos.kext on the first update but the second neather one of those was listed when i tried to do the 10.5.3 update. So I left everything alone and rebooted it goes to the apple logo on window with the circle turning under the apple and once it tries to go past that I just get a black screen. Any ideas how to fix this?
July 26, 2008 at 11:07 pm
p
@Steve: try to boot with -x and if that doesn’t help type -v and tell us what it says!
July 26, 2008 at 11:21 pm
Steve
is there any certain thing I should be looking for once I do eather of those steps?
July 27, 2008 at 7:35 am
jasonmac
I succeeded install the upgrade to 10.5.2 and boot into desktop but i can’t move my mouse or even my keyboard.
I saw the time clock still running on the top right corner.
and when i pressed the power button it asked me if i want to restart,sleep or shutdown. I just can’t use my mouse or even my keyboard.
anyone know wat’s up ?
July 27, 2008 at 7:46 am
jasonmac
it’s wierd.
I connected my wired mouse and keyboard to my laptop and they work fine !!!
just the mouse pad and keyboard on my laptop don’t work !!??
what should i do to fixed this ?? anyone ?
July 27, 2008 at 12:26 pm
p
@Steve: no
@jasonmac: Do you have USB mouse and keyboard? PS2 doesn’t work!
July 27, 2008 at 5:03 pm
steveluvmac
Does USB detect still work after updating to 10.5.4? I’ve read several places that it doesn’t.
Can anyone confirm?
July 27, 2008 at 8:10 pm
jasonmac
@p: yes, i have the usb mouse and keyboard. I used them on my laptop and they worked fine :D (it’s wierd leopard 10.5.2 doesn’t recognize my laptop’s mouse pad and keyboard).
I did a research and read that I should replace the AppleACPIPlatform.kext (dont remember exactly how to spell it :D ) so I did and it generated an error about improperly install during my second upgrade to 10.5.3 and this fucked the whole thing. I have to reinstall 10.5.1 again.
And this time, I used the kalyway 10.5.2 combo update. After the installation and boot, everything worked fine including my mouse pad and keyboard …hooorayyyy…..:D
OK, but I need to upgrade to 10.5.3 so that I could install the current iPhone SDK. But this time, kalyway 10.5.3 combo update didn’t do it for me. now I have to reinstall the whole thing again (like usual :D )
I traced the issue during boot. It said:
“Failed to load extension com.apple.driver.AppleAHCIPort”
“Couldn’t alloc class AppleICH8AHCI”
“Couldn’t alloc class AppleAHCI”
Anyone know what’s this mean ?
July 28, 2008 at 1:49 am
Arcy
jasonmac and others, you need to learn how to set up your system with a test partition so you don’t have to do a full reinstall of your os. You’ll find a wealth of information on insanelymac including how to properly fix your laptop keyboard and trackpad. BTW, I’m really curious why you need to install the iPhone SDK, you don’t seem to be a developer. You “traced the issue during boot”, you mean you booted in verbose mode so you could see where it halted?
As for does this still work or that? Depends and if you learn enough it’s all fixable except totally unsupported hardware. USB (working but the replug issue remains for many on certain hardware) PS2 can all work, you just need the right kext. The fun is figuring it all out. If you’re looking for an always up to date OS X install and ready for production then either be prepared to be patient and stay on top of the osx86 hacking community or by a Mac. For starters you may find this thread on im to be useful, there are many others. http://forum.insanelymac.com/index.php?showtopic=109102
July 28, 2008 at 4:05 am
redash
Has anyone tried doing this in one step?
ie download combo update 10.5.4 and go from 10.5.1>straight to10.5.4?
http://www.apple.com/support/downloads/macosx1054update.html
July 29, 2008 at 2:59 am
Franck
Hi and thanks for the guides,
I installed Kalyway 10.5.2, then the dual boot with Windows XP. Everything was fine.
Then i followed the above steps to upgrade to 10.5.3, and after the restart when I try to boot on OSX (with any of the ‘-x’ or ‘update -v’ options above), the PC just restarts without even trying to launch MAC OS…
Any idea?
July 29, 2008 at 6:58 pm
jasonmac
to Arcy:
ty for the link, it helps me much.
Sorry for the confuse. English is not my native language and I’m completely new to this “mac on pc” stuffs. In fact, I just started on this a week ago.
But I don’t agree with you on the part “why you need to install the iPhone SDK, you don’t seem to be a developer”. You don’t need to be a real developer in order to install and use iPhone SDK. I don’t think I am a real developer but I do like programming and have programmed for several years and I find the fun on using my own developed apps on my own iPhone. They don’t have to be a sophisticated apps, just a simple texteditor or so would be fine to me (even though there’s already one in iPhone :D . Just try to get some basic knowledges of programming in a new OS environment. :D
July 30, 2008 at 6:12 am
Erasmix
Hi,
I build my system using an ASUS P5K-VM mobo, a 150G WD Raptor, 4Gig RAM and an XFX GeForce 8600 GTS. The system is dedicate to Mac OS X.
I went thru the Kalyway 10.5.2 installer. Then I tied to download and install 10.5.4 from apple, but the install crashed and my system wouldn’t boot. So I went thru the 10.5.2 installer again and then downloaded Kalyway 10.5.3 and installed it OK. I know have a stable 10.5.3, with some glitches:
1) I can’t wake up my system if it goes to sleep (so I disabled the sleep mode). Also after I shutdown, the system stays powered up most times forcing me to push and hold the power switch.
2) Occasionally after the system comes up, the USB Keyboard and mouse aren’t working (I use PS/2 devices merged into a single USB port). If I unplug and plug it (same port or not, same thing), then the keyboard works again and I can login.
3) Yesterday OS X crashed with a gray screen during boot, but booted fine after powering the system up again. If I didn’t have 1) & 2) already, I wouldn’t be suspicious.
I appreciate any ideas. The way I built this system allows me to pull out the HD and plug another in (without opening the box) for testing purposes.
July 30, 2008 at 10:10 pm
p
@Erasmix:
ad 1) This is a known problem!
ad 2) PS/2 isn’t supported
July 31, 2008 at 1:34 am
Erasmix
Is 1) a problem with the mobo (can be solved with a BIOS update)?
2) I can buy a USB keyboard no problem but, I use a Linksys KVM that with a PS/2 jack for the console, so I will need to use a USB -> PS2 converter to plug the keyboard into the console. Will that still be seen as a PS2 keyboard?
July 31, 2008 at 11:11 am
p
Erasmix:
Try a BIOS update and tell us if it worked for you!
ad 2) OSX doesn’t control the PS2 ports, but try and error is often the best solution
August 1, 2008 at 8:51 am
Q
Erasmix:
I’m using a PS2 adaptor for my USB mouse to be compatible with my PS2 keyboard, no problems. PS2 mouse/keyboard do work, but they have to be both PS2 not PS2/USB combo.
BTW, I’ve always used Kalyway’s combo updates, instead of the official updates, and I haven’t had any problems (yet). So I’m holding out against 10.5.4 until a Kalyway update is available.
August 4, 2008 at 6:31 pm
niz
I tried using this method to upgrade from 10.5.2 to 10.5.3 and now I’m getting a kernel panic at startup:
panic(cpu 0 caller 0x0040352B): “8259-PIC: registerInterrupt failed”@/Volumes/disk1s2/leo_xnu/xnu-1228/iokit/Kernel/IOLib.cpp:724
Does this have to do with me having a SSE2 computer? When I did the original install of the kalyway 10.5.2, I had to use the jas SSE2 patch option. Any help would be very much appreciated, thanks!
August 9, 2008 at 4:51 am
woohoo
niz, I think this guide will work only if you use a vanilla kernel.
August 9, 2008 at 9:11 am
pastebt
if you PS2 keyboard and mouse has problem when you update from 10.5.2 to 10.5.3, please take a look at here:
http://netkas.org/?p=18
and
http://www.insanelymac.com/lofiversion/index.php/t96585.html
August 20, 2008 at 12:09 am
MX5
Can anyone confirm if this method only works for vanilla kernal computers with Core 2 Duo processors?
I have a Dell XPS M140 with Pentim M
2gb ram
Running Kalyway 10.5.2 right now.
Thanks.
August 25, 2008 at 4:37 am
2k9
Hey,
I have a problem going from the 10.5.2 – 10.5.3 as well.
I tried doing the “-x” and the “update -v” methods but with the “-x” I get the Gray screen just loading on an on.. And with the “update -v” nothing happens at all.
When following the steps to install the 10.5.3 update I did not find the AppleIntelCPUPowerManagement.kext file nor did i find the Don’t Steal Mac OS`X.kext file. So I thought maybe it would work. So i rebooted, and got the Gray screen of constant loading.
Appreciate any help, Thank You
August 26, 2008 at 2:00 am
2k9
An update,
I reloaded 10.5.1 and followed the above method to 10.5.2 and when i read the 10.5.3 combo hack’s read me file, I decided to try that. It told me to install a different kernel and do the “update -v” on f8 on darwinx86 boot.
I did that, and after restarting once, I got past the grey screen and got to the part where my wallpaper displays. Then I got the “You Need to Restart the computer, please hold the restart button” etc. etc.
August 30, 2008 at 11:08 am
Jim
Got the same problem as Franck above.
I had Kalyway 10.5.1 (dual-boot with Windows XP), then used your procedure to upgrade to 10.5.2. Now every startup of OS X quickly falls back into a reboot.
With -x -v I see a lot of text fly by, but once the reboot starts it is off the screen — too soon for me to read it.
I went into your link to Netkas’s blog, and he mentions saving a couple of things before the start of the whole procedure. No mention of that here, so I didn’t do it. Has that something to do with this? Is there a way to recover?
August 31, 2008 at 6:31 pm
Aylwin
I get the same reboot problem. The work around is to always startup OS X with the update option. I’ve tried many times already. OS X only starts if I update. Strange.
It’s not a big deal as everything seems to work fine once OS X is up and running. But it’s a bit annoying that it doesn’t work perfectly. Is there any permanent fix for this?
September 2, 2008 at 9:42 am
Jim
@Aylwin: that doesn’t work for me.
September 3, 2008 at 10:14 pm
SNole
Btw.
I downloaded the update combo’s from Apple.
Are thay the files to use for this, or do I need Kalyway’s update combo’s?
September 5, 2008 at 3:48 am
Daff
I installed Kalyway 10.5.2, but I can only start up the Mac OS with my DVD drive, otherwise the message “HFS + Partition errer” appeared. Any idea how to fix it.
September 6, 2008 at 1:33 pm
Dennis
It seems like more people including myself are having problems with the Kalyway 10.5.3 Update Combo. Can someone provide an actual working tutorial for 10.5.3? This seems where most people problems are coming in at. Thanks in advance!
September 8, 2008 at 11:48 pm
Jerry
Hey! Well i tried to do the first step, and i never saw the appleintelcpu…. so the update was still in progress when this text box appeared: “you need to restart your computer. hold ….” so i did and i also tried the -x -v and all that stuff but nothing happens, now the dvd drive is not coming to action with the kalyway instal…. so i cant reinstall it or do anything!!! i tried to make the boot from the dvd drive but doesnt work either… so can you help me please! is there anything i can do about it?
thanks!
September 9, 2008 at 12:58 pm
Wally
when I was updating 10.5.2 to 10.5.3. my system hanged during boot. I then recall someone mentioning using ‘update -f’. this seemed to fix my problem.
make sure you run the kernel package before the reboot, this is stated in the nfo!
September 13, 2008 at 6:49 pm
bklynjava
@ Daff start your system and press f8
Try this fdisk -u /dev/rdisk0 –> to fix your HFS
September 15, 2008 at 3:29 pm
GaryG
I followed the steps to update from 10.5.2 to 10.5.3 exactly and now Leopard won’t boot at all.
I’ve tried -x and -v and neither of them work. I tried update -v and nothing happens at all.
Right now I am reinstalling 10.5.2 and I don’t think I will be updating again any time soon. Not unless someone can help me that is.
September 15, 2008 at 7:01 pm
Jim
No solution was found for the non-booting problem (GaryG and Franck have the same situation apparently). Have reinstalled 10.5.1, maybe I’ll try the “Kalyway combo update” package this time.
September 17, 2008 at 12:22 am
mustakim
Yes, there’s no solution unless you download new mac osx.. iatkos 10.5.4 (but it is too slow…). Maybe direct download will help (but need pay some money to get it)
I also have a same problem with my Kalyway. I failed to update to 10.5.3 with a kernel panic resulted yesterday.. and my conclusion is I want to try to get iatkos 10.5.4. Tomorrow I am going vacation.. maybe next week I will download iatkos 10.5.4.
Don’t waste your time to combo update or upgrade because this hackintosh will get dizzy and flu.. Get a new one, I recommend iatkos 10.5.4
September 28, 2008 at 7:23 am
Tony
I have a working VMWare Workstation 6.0.4 image of Mac OSX 10.5.2. It is the image FreeBSD – 64 image that PCWIZ put together.
I need to update it to 10.5.4 at least so I can do iPhone dev. That is my whole purpose.
I have tried your method and many others and can’t seem to get any of them to work. They either continually reboot or stay in the grey screen and spin forever.
The one thing I am not sure of is what is the exact command line or thing you do when someone writes “Restart and boot with -v”?
Even better would be if anyone could please just make a working VMWare 6.0.4 image with 10.5.4 on it and send me a link????
Thanks.
September 29, 2008 at 4:00 pm
Tony
I thought I might add to my request that I purchased a Mac OSX 10.5.4 DVD, so I am not trying to get something for free. I just can’t afford a full blown Mac right now, but would like to do Mac dev. I tried the Linux versions and they are a pain in the butt to get anything really done in. I wanted to give the official SDK a go.
If it works out then I will probably buy a Mac, but want to try before I buy.
October 3, 2008 at 2:09 am
Kam
so im updating from 10.5.2 to 10.5.3 like a lot of you guys. i found intelcpumanagement.kext and deleted it. after that a rebooted because i didnt have that “dont steal mac os x.kext”. so after i rebooted, i get the grey screen, takes about 30 seconds. i get past that. THEN i have this black screen. i think the computer is on because i see that my wireless is on. can anyone help?
October 3, 2008 at 2:19 am
Kam
UPDATE:
EVERYTHING IS WORKING BUT MY MONITOR! i do not know how to fix this. anyone help me?
October 3, 2008 at 7:10 am
OpTioN
After moving AppleIntelCPUPowerManagement.kext to the trash the system froze. Now when I reboot I’m always stuck at the gray spinning apple splash screen. I tried to -s and used command line to edit the 1 file as described but it doesn’t help. Please help me, I can’t make a fresh install because I don’t want to loose the data on the hard drive!
October 3, 2008 at 7:13 am
OpTioN
BTW, I tried update -v and -x nothing works. When I do -s it see all the info until it says Started but then it freezes there.
October 4, 2008 at 4:28 am
Texaswilly
i tried this update from 10.5.2 to 10.5.3, and after it reboots it does the gray screen with the appl and then it goes to a blue screen and does nothing. i have followed the instructions to the letter. i have tried update -v, -x, and everything that everyone else with problems so far in this post has tried. i have tried the solutions offered thus far, and have not had any success so far. i have a gateway CX2724 tablet pc (equivalent to the gateway CX210X tablet PC), and i am trying to run osx86 from my external 320GB Western Digital HDD. 10.5.2 works well, but i want to do some iPhone app development, so i need at least 10.5.3. someone help me please.
October 5, 2008 at 1:00 am
OpTioN
I was able to make a new 10.5.1 installation on the empty space in my second partition. Mirgrating Applications and setting froze at the end but seemed to work. I didn’t have enough space to migrate user files (songs etc.) but I can still access everything on the other drive from my new os partition. It would have been easier if I had made a timemachine backup which really should be the first step of this guide. Now I need to figure out how to fix my old os or set up the second partition as the default boot.
October 10, 2008 at 12:36 pm
masakari
Are there any special instructions for updating to 10.5.5?
October 15, 2008 at 7:46 pm
george
Daff,
OS X boot disc in and boot into -s mode with it.
type fdisk -e /dev/rdisk0 (change the rdisk number if need be), setpid 1 (I’m assuming OS X is on your first partition), AF, quit, reboot.
that should work!
October 16, 2008 at 7:48 am
10.5.5 Update Success « Berlin Open Computer Design
[…] because ultimately you will need to figure out what the best method to update for your machine is. -https://cocoatree.wordpress.com/2008/07/21/how-to-update-kalyway-1051-to-1054/ […]
October 18, 2008 at 3:02 am
lokesh
sir
when was install the update 5.1.2, my mac system restarts and do nothing any idea
October 24, 2008 at 9:48 pm
devil
i have done the update to 10.5.3 but when i wont to start it didnt go it game only the start picture
please help
October 31, 2008 at 10:52 pm
Jessssss
hmmm I waited for AppleIntelCPUPowerManagement.kext to show up at the bottom of the extensions but I got a grey screen that fell down beforehand that locked everything up and said I must reboot. Now I have the kernel panic. Must I start over from scratch? How do I avoid this next time?? I’m not an avid mac user so maybe the keyt files don’t show up at the bottom of the directory as they would in windows??
All I really wanted 10.5.4 for was the Atheros / IBM wireless card support, and maybe improved Radeon video support since Final Cut crashes alot and dvd player doesn’t work at all.
October 31, 2008 at 10:58 pm
Jessssss
and I forgot to mention I am running Win2k3 on another partition with Macdisk / Transmac . Can I go into the drive and change it back or is the damage already done?
T42 laptop with built in radeon mobile 7000 32mb video, Ac97 audio, IBM / Atheros wireless, and dynex PCMCIA firewire card
December 7, 2008 at 12:53 am
Javi
@P – I have the same problem as Steve. I get a black screen after the upgrade from 10.5.2 to 10.5.3. Option -x did not do anything,I got to the same black screen and I see the HD working. After 5 min it stop working. I rebooted with option -v and I get through all the messages, then to a light blue screen and then to the black screen again.
I have tried the upgrade many times using the instructions on this blog. I also tried the Kalyway method and got to the same place a Black Screen.
I’m using a Lenovo T61 .
Javi
December 18, 2008 at 8:55 am
Andry
Need ATI Radeon graphics cards driver for my Mac OS X86
December 18, 2008 at 8:56 am
Andry
Need ATI Radeon 9600 pro graphics cards driver for my Mac OS X86.
Thanx.
January 6, 2009 at 11:35 pm
Martin
Worked perfectly – thank you for making a quick and clear guide to this !!
January 9, 2009 at 8:34 am
Pharaon
hi there sorry for that crash message but i am still totally new to this i have some experince with freeBSD but i find some problem in updating
mouse and keyboard PS2 dont work after update
any help ???
Thank you in advance
January 9, 2009 at 8:36 am
Pharaon
oooh sorry i am on kalyway 10.5.2 and trying to go along the way untill 10.5.6
February 9, 2009 at 8:32 am
Jagat
Hi All,
I have a p4 machine with 512 k ram. processor type shows as SSE2 SSE3
I burnt a dvd kalyway 10.5.1 and booted from it with -v, it went for sometime and then restarted.
What could be the problem ? unless i could install 10.5.1 i cant go further upto 10.5.4, please help me
regards
Jagat
February 27, 2009 at 7:20 pm
sam
Hi Jagat, i had some of the same probs as you. when you boot, dont hit -v, just hit enter. also for some who are having problems on restart try different things such as when you partition your drive select guid instead of mbr and dont select any options whatsoever. this is how i solved all my problems and works great.
April 11, 2009 at 12:56 pm
X99
Ahhm.
My problem is that macosx restarts automaticaly and so i cannot remove something or change something in the script file,
May 15, 2009 at 10:18 am
OSX86NEWBIE
Hi there,
I read your great guide – thx. I have some questions to you. I want to update my Kalyway 10.5.1 to 10.5.6. Could you help me please. My Hardware is a Asus P5W DH DELUXE. I understand what you explain but I don’t know where I can get all these updates or it is possible to update direct to 10.5.6 from 10.5.1 with a trick?
thx for your answer
OSX86NEWBIE
May 25, 2009 at 7:05 pm
johnsdre
Hi,
When I click Get Info on the InstallAtStartup folder it pops up for a split second then goes away and opens my Home folder. So I am unable to get to the file I need to change before I restart. Any ideas on what I can do to resolve this issue?
May 29, 2009 at 12:56 pm
fucker
fuck you all together for this shit
May 29, 2009 at 2:27 pm
Admin
we are freaks! We can not fuck – why do we sit in front of our computers all day.
June 8, 2009 at 5:27 am
Ryno
After updating to 10.5.4 how would I update to 10.5.6? thanx
August 11, 2009 at 6:13 pm
dvdplayer
thank you for your article, this is the good information
November 28, 2009 at 9:09 pm
DavidAlex
Hey
Ive had a similar problem during the 10.5.2 to 10.5.3 update.
I moved the .kext file to the trash and shortly after the mac froze and told me I must restart. Now its getting stuck at the apple loading screen and doesnt appear to want to budge. Ive tried loading in safe mode and nothing happens :(
Any suggestions?
Thankyou
January 2, 2010 at 4:42 am
alies
With me it all goes fine on 10.5.3, but after that computer crash on upgrading to 10.5.4, or to 10.5.8 directly, any possible help..thamnks a lot
January 31, 2010 at 5:23 am
Joshua
I installed Mac OS X Leopard 10.2 . Then i downloaded Mac Os x 10.3 combo update and deleted the AppleIntelCPUPowerManagement.kext file
and after the update i went to installstartup folder but i could not access the folder so i went to get info but the screen disappeared.so i copied the folder and pasted it in the desktop and edited the script and replaced it with the original one.After restarting , i booted to leopard and then it restarted automatically without any message. what should i do ?
Compaq Presario SR5170CF
Intel Pentium D 3.00Ghz
Nvidia GeForce 8400 512mb
kernel : kernel_sleep
May 19, 2010 at 11:25 am
kazasid
i install compo update 10.5.3 and now i cant recognize the usb!plz help me!
February 16, 2011 at 8:25 am
Sid
I started the update did all the steps and all of them worked perfectly but when i did a restart by clicking on the restart button on the 10.5.2 update it took a lot of time to restart but when restarted i got the log in screen but when i type my pass and click login it again brings me back to the log in screen instead of logging
April 19, 2011 at 2:55 am
ricazoid
I followed everything the article said, but after I installed the 10.5.3 update, the computer goes into a restart loop. PLZ HELP!!!
July 18, 2013 at 11:10 pm
game gaming blog games hack cheats game blog game forum tool tools soft software computer computer game android apk ios phone phone game android game android games free game ios game hack ios hack android facebook game how to cheat how to hack download ga
Marvelous, what a webpage it is! This webpage presents helpful information to us,
keep it up.
August 1, 2013 at 10:50 am
outils referencement
Howdy! This is my first visit to your blog! We are
a group of volunteers and starting a new project in a community in the same niche.
Your blog provided us valuable information to work
on. You have done a extraordinary job!
June 11, 2014 at 12:25 am
http://www.turboautoshock.com/forum/you-want-know
The opposite Gold Corporations that do supply an Affiliate Program, they
only pay a flat fee per Lead (round $30 per Lead).
June 13, 2014 at 9:21 pm
Building Construction Related to the Fire Service download mobi
Wow, this post is fastidious, my younger sister is analyzing these kinds of
things, thus I am going to tell her.
June 17, 2014 at 8:38 pm
Le Berger blanc suisse pdf
I have read so many articles on the topic of the blogger lovers but this
article is actually a fastidious paragraph, keep it up.
September 26, 2014 at 8:49 pm
f8 digital community philippines
I was suggested this web site by my cousin. I am not
sure whether this post is written by him as nobody else know such detailed about my
problem. You are amazing! Thanks!
October 9, 2014 at 6:57 am
scs
I am actually glad to glance at this webpage posts which
includes plenty of valuable facts, thanks for providing these data.
October 13, 2014 at 1:51 pm
Fix Kalyway Blue Screen Fix Errors - Windows XP, Vista & Windows 7, 8
[…] How-to Update Kalyway 10.5.1 to 10.5.4 | Cocoatree – Hi (sorry for my english) i had trouble updating from Kalyway 10.5.2 to 10.5.3 i have the eternel grey screen with the apple logo and the spining wheel i tried every methode (way) what could be the probeleme? thank you […]
December 16, 2014 at 3:44 pm
s232 data logger
I love reading through a post that will make people think.
Also, thank you for allowing me to comment!
January 8, 2015 at 6:55 pm
Tarah
Today i spent 300 $ for platinium roulette system , i hope that i will earn my first money online
March 5, 2016 at 7:04 am
บาคาร่าออนไลน์
What’s up to all, because I am really eager of
reading this weblog’s post to be updated regularly. It consists of good data.
April 5, 2016 at 6:10 pm
Robin
Online codes present excellent savings on your online acquisitions.
June 2, 2017 at 7:58 am
borvest inkral
Fantastic site. Lots of helpful information here. I’m sending it to a few friends ans also sharing in delicious. And of course, thanks for your effort!